Spring Load Restriction - Press Release #4 (Week of March 7-11, 2022)
For Immediate Release: Friday, March 4, 2022
Contact: Dan Varilek, Winter Maintenance Specialist, 605-773-3571
PIERRE, S.D. – Spring Load Limit Restrictions will apply to the road segment(s) and at the indicated weight limit shown in the table below.
Effective Date |
Highway |
Location |
Begin/End MRM |
Length |
Posting |
Region |
March 7, 2022 |
SD 1806 |
Jct. SD 273 north to US 83 |
138.45 to 180.05 |
41.6 |
6 Tons/Axle |
Pierre |
March 7, 2022 |
SD 1806 |
Intersection west of the dam to Mission Ridge |
193.83 to 221.05 |
27.2 |
7 Tons/Axle |
Pierre |
March 8, 2022 |
SD 26 |
From Hwy 47 to Hwy 45 |
230.12 to 252.85 |
22.7 |
6 Tons/Axle 80,000 GVW |
Aberdeen |
March 8, 2022 |
SD 26 |
From Hwy 45 to Hand/Spink Co Line |
253.85 to 267.77 |
13.9 |
6 Tons/Axle 80,000 GVW |
Aberdeen |
March 8, 2022 |
SD 45 |
US 14 to US 212 |
112.35 to 137.72 |
25.4 |
8 Tons/Axle 80,000 GVW |
Aberdeen |
March 8, 2022 |
SD 28 |
From US 281 to SD 37 |
269.97 to 283.99 |
14.0 |
7 Tons/Axle 80,000 GVW |
Aberdeen |
The effective date of a load restriction is determined by weather and road conditions. When restrictions go into effect, a notice will be sent out and posted on the spring load restriction page of the South Dakota Truck Info website at https://sdtruckinfo.sd.gov/spring-load-restrictions/.
A spring load restriction report is usually issued in advance of any major load restriction change. This report is issued for guidance only and does not take precedence over any load restriction signs in place. For further information, or a copy of a Spring Load Restriction map, please contact the SDDOT at 605-773-3571.
Spring Load Limit Information is available at https://sdtruckinfo.sd.gov/rules-regulations/size-weight-regulations/spring-load-restrictions/ and also on the SD511 site at https://sd511.org/; click on Traffic Notices then CVO Restrictions for current restriction.
Individuals can subscribe to an email list to receive spring load limit restriction information electronically at https://listserv.sd.gov/scripts/wa.exe?A0=DOTSPRINGLOADLIMITS. Click subscribe located on the right side of the screen and follow the instructions. A valid email address is required. If you would like to unsubscribe at any time from the list, visit the same site, click unsubscribe, and enter the information and email you subscribed with.
For more information, contact Dan Varilek, Winter Maintenance Specialist, at 605-773-3571 or by email at daniel.varilek@state.sd.us.
-30-
