MONTREAL, Oct. 01, 2018 (GLOBE NEWSWIRE) -- Osisko Metals Incorporated (the “Company” or “Osisko Metals”) (TSX-V: OM; FRANKFURT: OB51) is pleased to announce assay results from 9 drill holes completed in the East Mill Zone located in the Pine Point Mining Camp (“PPMC”). Drill hole EM-18-PP-133 intersected 12.71% Zinc and 6.97% Lead (19.68% Lead + Zinc) over 6.30 metres.  Three other holes also intersected significant zones of mineralization: hole EM-18-PP-136 intersected 3.96% Zinc and 2.29% Lead (6.25% Lead + Zinc) over 5.33 metres, hole EM-18-PP-147 intersected 6.36% Zinc and 0.80% Lead (7.16% Lead + Zinc) over 7.85 metres, and hole EM-18-PP-148 intersected 7.65% Zinc and 1.33% Lead (8.98% Lead + Zinc)over 8.98 metres

Pine Point Summer Drill Campaign L36 Deposit Pine Point Summer Drill Campaign LM62 M63 Deposit

All intersections are within a flat lying tabular-style deposit known as L-36 and all intercepts are located above 40 metre vertical depths. (See 2018 Summer Drill Campaign East Mill L-36).

The historical L-36 deposit currently measures 800 metres in strike length with an average mineralized width of approximately 120 metres. It occurs within the East Mill Zone that hosts eight historical deposits containing unclassified historical resources reported by Cominco Ltd. (1988). The L-36 deposit is located 1.7 kilometres to the east of the existing electrical sub-station and former mill site along the main haulage road. The East Mill Zone extends 7.6 kilometres to the east of the substation and is adjacent to the main haul road along its entire length. Highlights are listed below in Table 1 and details are provided in Tables 3 & 4.

Table 1: Selected Drill Highlights L-36

Note: Lead + zinc grades may not add up exactly due to rounding to 1/100.

The Company is also pleased to announce additional assay results from 7 drill holes completed in the Central Zone. Drill hole M6263-18-PP-021 intersected 2.47% Zinc and 3.31% Lead (5.78% Lead + Zinc) over 6.37 metres.  Of note is hole M6263-18-PP-030 that intersected 12.95% Zinc and 0.88% Lead (13.83% Lead + Zinc) over a revised 2.72 metres in a zone below the targeted horizon.

All intersections are within a flat lying tabular-style deposit known as M-62, M-63 and all intercepts are located above 85 metre vertical depths. (See 2018 Summer Drill Campaign Central Zone M-62, M-63).

All reported holes are from the historical M-62, M-63 deposit that currently measures 1,100 metres in length with an estimated mineralized width between 80 and 110 metres. within the Central Zone. The Central Zone hosts twelve historical deposits with unclassified historical resources reported by Cominco Ltd. (1988) over a distance of 7.6 kilometres, (including the M-62, M-63 deposit of 789,200 tonnes at 6.7% Zinc and 2.5% Lead, Cominco Ltd., 1988). This area is located 11 kilometres to the west of the electrical sub-station along the main haulage road. Highlights are listed below in Table 2 and details are provided in Tables 3 & 4.

Table 2: Selected Drill Highlights M-62, M-63

*M6263-18-PP-030 was previously reported (See news release: September 5, 2018) but additional assays have increased the width of the intersection.
Note: Lead + zinc grades may not add up exactly due to rounding to 1/100.

The objective of the 2018 drill program is to upgrade approximately 50 million tonnes of unclassified near-surface historical resources within known deposits (Cominco Ltd.) to NI43-101 Inferred Mineral Resources as quickly as possible in areas amenable to open pit mining. This will then be used as a resource base for future economic studies.

The 2018 program consists of approximately 700 drill holes within the Main Trend, a 20-kilometre long, portion of the PPMC that is located on the south shore of Great Slave Lake in the Northwest Territories, near infrastructure and paved highway access and with 100km of haulage roads already in place.

Note regarding historical resource and Qualified Person

The above-mentioned historical resources do not conform to National Instrument 43-101 standards. The Company is reporting the historical estimates for reference purposes only. Neither Osisko Metals nor its consultants have completed sufficient work to verify the historical estimates and these should not be relied upon for investment purposes. A Qualified Person has not done sufficient work to classify the historical estimates as NI43-101 compliant mineral resources and there is no guarantee that such work will allow conversion of such historical resources.

Stanley G. Clemmer, P. Geo registered in the Northwest Territories and is Chief Geologist for Pine Point Mining Limited, a wholly owned subsidiary of Osisko Metals Limited. He is the Qualified Person responsible for the technical data reported in this news release.

Quality Assurance / Quality Control

Osisko Metals adheres to a strict Quality Assurance and Quality Control program with regard to core handling, sampling, transportation of samples and lab analyses. Drill core samples from the Pine Point project area were securely transported to its core facility in Hay River, Northwest Territories where they were logged and sampled. Samples selected for assay were shipped via secure transportation to the ALS Canada Ltd.’s preparation facility in Yellowknife. Pulps were analyzed at the ALS Canada Ltd. facility in North Vancouver, British Columbia. All samples are analyzed by four acid digestion followed by both ICP-AES and ICP-MS for ultra-trace level detection for a multi-element suite with a 1% upper detection limit for base metals.  Samples reporting over 1% for Zn and 1% for Pb are analyzed by assay grade four acid digestion and ICP-AES analysis with an upper detection limit of 30% and 20% respectively.  Samples reporting Zn >30% and or Pb >20% are analyzed by traditional titration.

Table 3: Composite Assay Results

Table 4: Drill hole collar locations (UTM NAD83 zone 11)

About Osisko Metals
Osisko Metals is a Canadian exploration and development company creating value in the base metal space with a focus on zinc mineral assets. The Company controls Canada’s two premier zinc mining camps in Canada, namely the Pine Point Camp (“PPMC”) located in the Northwest Territories (22,000 ha) and the Bathurst Mining Camp (“BMC”), located in northern New Brunswick (63,000 ha). The Company is currently drilling in both camps for a combined 100,000 metres. The focus of these programs is to upgrade historical resources to comply with NI43-101 regulations and also on exploration around historical deposits. Brownfield exploration includes new innovative 3D compilation techniques, updated geological interpretation, and modern geophysics. In Québec, the Company owns 42,000 hectares that cover 12 grass-root zinc targets that will be selectively advanced through exploration. In parallel, Osisko Metals is monitoring several base metal-oriented peers for opportunities.

Cautionary Note Regarding Forward-Looking Information

This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation based on expectations, estimates and projections as at the date of this news release. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward-looking information in this news release includes, but is not limited to, the use of proceeds of the Offering; the timing and ability of the Corporation, if at all, to obtain final approval of the Offering from the TSX Venture Exchange; an exemption being available under MI 61-101 and Policy 5.9 of the TSX Venture Exchange from the minority shareholder approval and valuation requirements for each related party transaction; objectives, goals or future plans; statements regarding exploration results and exploration plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates; the preliminary nature of metallurgical test results; delays in obtaining or failures to obtain required governmental, environmental or other project approvals; uncertainties relating to the availability and costs of financing needed in the future; changes in equity markets; inflation; fluctuations in commodity prices; delays in the development of projects; the other risks involved in the mineral exploration and development industry; and those risks set out in the Corporation's public documents filed on SEDAR at www.sedar.com. Although the Corporation believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Corporation disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.

Photos accompanying this announcement are available at:

http://www.globenewswire.com/NewsRoom/AttachmentNg/e6d67b28-304c-43dc-91b6-e776aa4e91f7

http://www.globenewswire.com/NewsRoom/AttachmentNg/b3c347b1-40d2-4907-9567-c5a0894bdc31

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.