Dublin, July 17, 2017 (GLOBE NEWSWIRE) -- The "Delphi RSDS76Ghz Radar: Structure and Cost Analysis" report has been added to Research and Markets' offering.

Delphi's Rear and Side Detection System (RSDS) utilizes 76Ghz single-beam mono-pulse radar. Its compact design enables simplified vehicle integration. The RSDS offers an array of active safety features including blind-spot detection, lane-change merge assist, rear cross-traffic alert, and rear pre-crash sensing.

Concerning the radar function, receiver and transmitter chips from Infineon using SiGe HBT technology are assembled by wire bonding on the RF board. The antenna board uses a PTFE-based substrate and is equipped with planar antennas for transmission and reception of the RF signals. Processing is realized by a Renesas 32-bit MCU and a Texas Instruments Jacinto Processor.

Based on a complete teardown analysis of the Delphi RSDS, this report provides the system's bill-of-materials (BOM) and manufacturing cost. A physical analysis and manufacturing cost estimate for the Infineon RF chips is available in a separate report titled, Infineon RASIC: RRN7740 & RTN7750 77GHz Radar Dies, which also includes a comparison with the MMICs used in the Bosch MRR1 Radar.

For more information about this report visit https://www.researchandmarkets.com/research/52rgc3/delphi_rsds76ghz

CONTACT: Research and Markets
         Laura Wood, Senior Manager
         press@researchandmarkets.com
         For E.S.T Office Hours Call 1-917-300-0470
         For U.S./CAN Toll Free Call 1-800-526-8630
         For GMT Office Hours Call +353-1-416-8900
         U.S. Fax: 646-607-1907
         Fax (outside U.S.): +353-1-481-1716
         Related Topics: Automotive Safety

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.